FREE STAND OFFER
Click here

Compare to Other Stands

The One Man Stand (OMS) is a superior replacement for out feed support systems including roller stands, Flip Top stands, and most table extensions.

• The OMS will raise the work piece up 3-1/2", where as the ball roller
  offers 1/2", the cylindrical roller offers 1", and the Ridgid Flip Top offers 2" maximum rise. This exceptional rise allows greater distance from the saw and much less adjusting. Therefore, the OMS is simple to position, and only one person is needed to handle a variety of material.
  

• Due to the sliding motion on the OMS support, the work piece will not side track as shown below. Therefore, angular alignment is not necessary. These problems are common with the cylindrical roller.

• Ripping narrow pieces is impossible with a ball roller stand. OMS easily performs this task with its wide, similar surface.
  
  
• With OMS, the work piece will not take-off after the cut like a roller. Similar drag from the saw and the stand prevents this dangerous condition.
  
  
• With OMS, the work piece will not pop-up after the cut like a roller. Greater stand distance from the saw eliminates this problem.
  

• OMS is adjustable to uneven surfaces, most other stands are not. For details on adjustment, please go to “Proper Stand Operation” under How It Works.
  

• OMS has less drag than most extension tables due to the unique polymer surface.
  
  
• OMS can handle longer material than many extension tables because it is not attached to the saw.
  
  
• OMS does not require the committed space a table extension does – it folds up compactly
  
  
• OMS has no moving parts.
  
  
• OMS has a large offset adjusting screw which positively holds adjustment.